Worldwide Shipping

Menu
0

Worldwide Shipping

    • Login
    0

    Your Cart is Empty

    Home / Products / 2023 hot sell 80w 100w 130w 150w laser cutter power supply 150w for laser cutting machine
    H7da1cdd4dc6c4d16aa0e5fbbc9d7a5efk.jpg
    Hef57e443325f450ea6fa58a3773511c2r.jpg
    H8b389d7ba59e4511aeb444669fec8e04w.jpg
    H615d040a313344c188b489d349288ddbE.jpg
    H6c43a11877f44219a62beb1cc0ca05a1L.jpg
    H0b95c91007d148cc9ba6eaf801bb28274.jpg

    2023 hot sell 80w 100w 130w 150w laser cutter power supply 150w for laser cutting machine

    $277.08 - $358.68$0.00
    2023 hot sell 80w 100w 130w 150w laser cutter power supply 150w for laser cutting machine
    Product Description

    Your Laser Power Supply Expert

    YongLi is a leader laser manufacture in the laser cutting engraving industry because of our reliable, high-performance and
    cost-effective laser engraving cutting products, machines and accessories.Our 80W 100W 150W Co2 laser power supply with fast response time to provide a reliable and efficient power supply for your laser engraving machine or cutting machine.
    With simple TTL level control and open circuit protection, it is easy to use and longer lifetime.YongLi can meet all your laser engraving needs.

    High frequency CO2 laser power supply is developed and manufactured by YongLi and an authoritative laser power supply
    manufacturer.
    The product is small in size, light in weight, easy to operate, and has a high matching degree with CO2 laser tube. It allows CO2 laser tubes to have low startup and high response frequency, to improve their photoelectric conversion efficiency, and give full play to its performance. With its open-circuit protection function, it can avoid damage to laser power supply caused by no-load condition, improving the stability and service life of the laser power supply.
    Technical Parameters
    YL-2
    YL-U1
    YL-U2
    Input
    Input Voltage
    AC110V or AC220V(Please specifiy when place order)
    AC frequency
    47—440HZ
    Max input power
    450w
    600w
    1000w
    Output
    Max Output Voltage
    DC 30KV
    DC 35KV
    DC 45KV
    Max Output Current
    DC 25mA
    DC 28mA
    DC 35mA
    Efficiency
    ≥90 percent (full load)
    MeanTime Between Failure (MTBF)
    ≥10000 hours
    Response Speed
    ≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
    Withstand Voltage
    Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
    Environment
    Operating Temperature:-10~40°C,Relative Humidity (RH)≤90 percent
    Cooling Way
    Force-Air Cooling (FAC)
    Dimension
    220*150*100
    270*180*80
    320*210*80
    Color
    Black
    Product Details
    CO2 LASER POWER SUPPLY FOR YONGLI/RECI/EFR/SPT Co2 Laser Tube
    1. Targeted good: specifically targeted at my company enhanced CO2 laser tube supporting the use of laser power supply.
    2. Superior performance: good stability, fast response, dramatically lengthens the service life of laser. 3. Small volume,convenient installation.Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
    4. Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
    5. The power supply has the function of open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
    6. The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
    7. Application: CO2 laser power supply are mainly applied in engraving & cutting machine and laser marking machines.
    Features
    1.Zero-current half-bridge soft-switching circuit. High efficiency and fast response.Match variousmanufacturers of laser tubes.
    2.Simple Port Control, TTL level signals can control the laser start / stop.
    3.Protection switch is to check the outside water,ventilation, etc.
    4.Laser Power Adjustment: input oV to 5V analog signal, can also input PWM signal.
    5.0pen Circuit Protection Function: avoid the damage to laser power supply due to laser tube burst.
    6.Factory Aging Test: A.Each power supply will go through 6oR℃ and 12 hours aging test under fullload. B.500 times 7 seconds Start / Stop test.
    【Perfectly performance】

    Large cutting power.
    Powerful Features and High Integrity.
    High-efficiency
    high-frequency
    high-speed carbon dioxide laser
    matching power supply
    【High Security】
    The input and output of power supply are separated completely to avoid getting an electric shock. with well-grounded enclosure,
    the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply
    【Specificity and Good compatibility】
    YONGLI YL Series Co2 Laser Power Supply Unit is designed exclusively for Co2 Laser Cutting Engraving Machines and can be applicable to 30w-200W co2 laser tube of a number of manufacturers regardless of the laser tube brands. Quick response speed.
    Guarantee
    The quality guarantee period of YongLi CO2 laser power supply produced by our company is as follows (including inventory period) from the shipping date.
    12 months Service mode:
    If your CO2 laser power supply purchased from us breaks during the warranty period, please show relevant certificates, keep the factory label and product appearance intact and non-degraded, and contact our company for a warranty service.
    Installation Instructions

    Replacement Parts for CO2 Laser Tube and CO2 Laser Engraver /Cutter / Marker.
    Simple Installation
    Each connection port is clearly labeled to facilitate quick and easy installation.
    The power supply also comes with a physical TEST button for fault detection, so you can troubleshoot with ease.
    Application
    LASER POWER SUPPLY FOR CO2 LASER ENGRAVER CUTTING MACHINE
    These 40-180 watt laser tube power supplies are available in 110 or 220 input voltage. The power supply comes with 1-3 fans (depends on the model type) to provide cooling, two banks of terminals, a test firing button for testing laser output, and connection for the laser high-tension line.

    Replacement Parts for CO2 Laser Tube and CO2 Laser Engraver /Cutter / Marker.
    * This power supply is specially designed for all brand of co2 laser tube such as YongLi As/H series, Reci W /T series, SPT, EFR laser tubes and so on.

    Collections: Recommended products (Seguno)

    Type: Unknown Type